Terk FDTV2_OMЙ - Manual (Page 6)

FD
TV2
5
Installation
(continued)
1. Make sure your converter box
is turned off.
2. Connect the FDTV2’s built-in
cable to the antenna input on
the converter box.
3. Follow the directions in the
manual that came with your
converter box to connect it to
your TV.
4. Run your converter box’s setup
routine to scan for available
broadcast channels.
FDTV2 Built-In
Coaxial Cable
Coaxial
Cable
Audio/Video
Cables
Converter Box
TV
–or–
To connect the FDTV2 to a converter box:
Note about digital channels
To display digital signals on your TV, you’ll need
to have the right equipment: either a TV that is
capable of decoding digital signals or a digital
converter box.