Terk FDTV2_OMЙ - Manual (Page 5)

FD
TV2
Installation
(continued)
4
Connecting the FDTV2
You can connect the FDTV2 directly to your TV or use
it with a converter box or other tuning device with an
antenna input (such as a cable box or satellite receiver).
FDTV2 Built-In
Coaxial Cable
TV
1. Make sure your TV is turned off.
2. Connect the FDTV2’s built-in
coaxial cable to the antenna input
on your TV.
3. Run your TV’s tuner/channel
setup to scan for available
broadcast channels.
To connect the FDTV2 directly to your TV: