Figure 19 – transmitter distortion test results, Qphy-broadr-reach software option – Teledyne LeCroy QPHY-BroadR-Reach User Manual

Page 29

Text mode
Original mode

QPHY-BroadR-Reach Software Option

Figure 23 – Transmitter Distortion Test Results

If the values are being properly returned from the MATLAB script then you will see the values displayed in
the main QualiPHY menu in real time.

If the MATLAB script is not properly returning values you will see “NoneV” listed as the distortion test
result. In this scenario verify that the Matlab Runtime Component 7.7 is properly installed.

922533 Rev B