Teledyne LeCroy DFP2 - Digital Filter Package 2 - Manual (Page 14)

12
ISSUED: June 2013 923134 Rev A
1. A noisy sine wave with a frequency of 3 MHz.
2. The first low-pass filter with 20 MHz edge frequency
and 30 MHz transition region is applied.
3. A sparsed version of trace A.
4. A second low-pass filter with an edge frequency of 5
MHz and a transition region width of 6 MHz is applied to
the sparsed trace in 3.
The last trace shows the zoomed signal, which was filtered by a multistage filtering method.
Notice that all high frequency noise components were removed.