Teledyne LeCroy Signal Integrity Studio - Manual (Page 11)

Getting Started Manual
11 920134 RevA
SPARQ SI Studio Self-Contained Examples
These self-contained examples demonstrate operation of the SPARQ SI Studio software option.
Instructions Images
1 Required Equipment/files:

PC running SPARQ application, minimum version 6.5.1.1
 SI Studio USB license key OR SPARQ w/ SI_STUDIO software option
 Signal_Integrity_Studio_Examples_revX.zip
SPARQ installers and Examples zip file are available at www.lecroy.com/SIStudio
OR
2 Extract the Touchstone and setup files from the zip file

Extract all Touchstone files (.s2p and .s4p files) to:
C:\LeCroy\SPARQ\SPARQ\Results\
 Extract all .lss files to the path: C:\LeCroy\SPARQ\Setups\
Note: These folders are created when running the app for the first time.
3 Run the SPARQ app with access to Signal Integrity Studio capabilities:
 When using a SPARQ with the SI_STUDIO Option:
a. Connect the SPARQ to the PC, and start the SPARQ HW
b. Wait ~10 seconds for Windows to detect the drivers. You can close any
popups about scanning the SPARQ_CAL drive, which is the SPARQ’s SD
card.

When not using a SPARQ w/SI_STUDIO, a SI_STUDIO license key is required
a. Plug in the license key,
b. Wait ~10 seconds for the device drivers to load
4 Start the SPARQ application

Double-click the desktop icon called Start SPARQ