Teka Hydroclean HL 940 - Manual (Page 23)

23
ENGLISH
5. When the cycle is finished, the oven will
turn itself off, an alarm will sound and
symbol
will flash quickly.
6. Touch any sensor with your finger tip to stop
the alarm and to turn off symbol .
7. Turn the control dial to position .
8. Any traces of dir t and excess water can now
be removed with a damp cloth.
IMPORTANT
Do not open the oven door until the cleaning
programme has completely finished as the
cooling phase is necessar y for it to work pro-
perly.
The cleaning programme should be done at a
low temperature. When it has finished, any
residue can be safely removed with a damp
cloth. Cooling times var y depending on the
room temperature. Before touching any inside
sur face of the oven, check that it is cool.
How to use the tray-cleaning cycle
Teka Hydroclean ® enamel’s excellent proper-
ties mean that any traces of cooked food can
easily be removed from the trays. If stubborn
traces of cooked food remain after normal
cleaning, do the following:
1. Place the tray that needs cleaning on the
middle shelf suppor t.
2. With the oven cold, slowly pour 300 ml of
water into the tray.
3. Select the Teka Hydroclean ® cleaning func-
tion.
IMPORTANT
Teka Hydroclean enamel has been designed to
be cleaned using the oven’s automatic
cleaning programme and other cleaning
methods can damage it. Anti-limescale
products in par ticular can seriously damage
the enamel’s proper ties.
Teka Hydroclean enamelled oven trays should
not be cleaned in the dishwasher. If deep
cleaning is needed, use a gentle detergent.
Some foods such as tomato, vinegar or salt-
cooked roasts, can make the enamel’s
sur face appear to change; this is normal.
3172465-002 EPIFA.QXD:- 20/10/11 08:02 Página 23