Staub Electronics RL100 K40 - PORTABLE RADAR & LASER DETECTOR - Manual (Page 9)

Quiet Ride TM
The RL100’s exclusive Quiet Ride TM Function will automati-
cally silence all radar and laser alerts when traveling under
a specific speed of your choice between 20-65 MPH.
The factory default setting for Quiet Ride is “On” and your
unit is already preset to silence alerts when you travel below
25 MPH.
To change the speed at which alerts are silenced:
•
Press and hold MENU button for 3 seconds to access the
Menu Function.
•
Press release MENU button to scroll through functions
until you reach Quiet Ride. The display shows
Quiet On
•
Press and hold MUTE button for 3 seconds to access
speed options.
•
Press and release MUTE button to scroll through speed
selections. With each press, speeds between 20 - 65 MPH
are displayed in increments of 5 MPH. (20, 25, 30, etc.)
Stop pressing button when you reach your desired Quiet
Ride speed. For example, if 45 is your desired setting, stop
pressing when the display shows
45 MPH
.
The RL100 automatically saves your settings after 10 seconds,
exits the Menu Function and the display returns to the
main screen.
NOTE: Locations that you have “Marked for Alert” are not
affected by the Quiet Ride function and will initiate alerts at
any speed. (see page 12)
9