Staub Electronics SM-SBAR-BKT STRONG - UNIVERSAL SOUNDBAR BRACKET FOR FLAT PANEL TVS - Manual (Page 3)

pg.3
© 2012 STRONG
SM-SBAR-BKT Assembly Manual
ASSEMBLY STEPS
1.Install the Hook Brackets to the rear of the display. Once installed, the brackets will be between the
display and the wall mount.
NOTE: On larger displays only the bottom screw will be used.
2. Insert the Tray brackets into the rear of the Hook Brackets.
Keep the set screws loose to allow for adjusting the depth of the
soundbar once installed in step 3.
3. Cut the provided Trim piece to the width of the attached
sound bar.
4. Secure the Trim piece to the soundbar via the adhesive on
the Trim piece.