Alpine IDA-X303 - Manual (Page 40)

38
-EN
• The iPhone/iPod is not verified.
- Change another iPhone/iPod.
• Abnormal current is being drawn by the device connected to
USB. An error message may be displayed if the device
connected is not compatible. The USB Flash Memory device
may be defective.
- Attempt to connect another USB memory.
• A USB device that is not supported by the unit is connected.
- Connect a USB device that is supported by the unit.
• A USB memory is not connected.
- Make sure the USB memory device is correctly connected and
the cable is not excessively bent.
• No song (file) is stored in the USB memory.
- Connect the USB memory device after storing songs (files).
• A sampling rate/bit rate not supported by the unit is used.
- Use a sampling rate/bit rate that is supported by the unit.
• A copy-protected WMA file was played back.
- You can only play back non-copy-protected files.
• Text information that is not recognizable by the unit has been
input.
- Use a USB memory device with input text information that is
supported by the unit.
• Abnormal current is being drawn by the device connected to
USB. An error message may be displayed if the device
connected is not compatible. The USB Flash Memory device
may be defective.
- Attempt to connect another Portable audio player.
• A Portable audio player that is not supported by the unit is
connected.
- Attempt to connect another Portable audio player.
• A Portable audio player is not connected.
- Make sure the Portable audio player is correctly connected and
the cable is not excessively bent.
• There are no songs in the Portable audio player.
- Download songs to the Portable audio player and connect to
this unit.
• Text information that is no supported on the unit has been input.
- Use a Portable audio player in which text information is input
that is supported on the unit.
• Communication error
- Turn the ignition key off, and then set to ON again.
- Verify in the display after reconnecting the Portable audio
player to the connection cable.
• Caused by the Software Version not being compatible with this
unit.
- Update the Portable audio player Software Version.
• The Portable audio player is not verified.
- Change another Portable audio player.
Indication for USB memory
3
CURRENT
ERROR
DEVICE
ERROR
NO USB
DEVICE
UNSUPORT
NO SUPPORT
Indication for Portable audio player Mode
CURRENT
ERROR
DEVICE
ERROR
NO USB
DEVICE
NO SONG
NO SUPPORT