Staub Electronics SM-PROJ-M-BLK STRONG - UNIVERSAL PROJECTOR MOUNT FOR PROJECTORS UP TO 30LBS - Manual

SM-PROJ-M-BLK
Strong™ Universal Projector Mount
for Medium Size Projectors (Black)
INSTRUCTION MANUAL
10405 Granite Street Charlotte, NC 28273 | 1.866.424.4489
ADJUSTMENTS
To change the tilt of your projector, use Allen Key (D) to first loosen the
Allen Screws on the Mount Base (M). Tilt the projector into the desired
position and re-tighten the screws.
To change the direction your projector faces, first loosen the set screw
with the Allen Key (E). Turn the projector to the desired direction and
re-tighten the set screw.
WARNING: When adjusting the direction, only turn the mount
enough to reach the desired direction. DO NOT CONTINUALLY
TURN THE PROJECTOR IN A COUNTER-CLOCKWISE DIRECTION! This
can cause the mount to come apart and may cause damage and/or injury.
Lifetime Limited Warranty
Strong™ Mounts have a Lifetime Limited Warranty. This warranty includes
parts and labor repairs on all components found to be defective in material
or workmanship under normal conditions of use. This warranty shall not apply
to products which have been abused, modified or disassembled. Products to be
repaired under this warranty must be returned to Snap AV or a designated service
center with prior notification and an assigned return authorization number (RA).
For Technical Support call 1.866.838.5052
Lifetime
engineered by