Spigen Steinheil ENHANCED OPTICAL HARD COATED FILM for Tablets User Manual
Installation guide, For tablets

1. Clean your hands to prevent
fingerprint stain. Adjust the location
before remove vinly cover from the
film. The film is made smaller than
actual LCD size for easier applica-
tion.
2. Spray on the cloth with the clean-
ing kit included.
3. Make sure the device is table and
clean the surface of LCD. Carefully
wipe the dirt and stain.
Installation Guide
for Tablets
4. NEVER spray directly on your iPad
LCD.
5. Remove half of the vinyl covered
the film and remove the rest as you
apply the film on LCD.
6. If you find any dust under the film
after installation, use sticky-tape to
remove the dust as shown in the
picture.