Southern Folger 8065L PNEUMATIC LOCKING SYSTEM - Manual (Page 2)

P.O. BOX 2021 • SAN ANTONIO, TX • 78297 • 210-533-1231 • FAX: 210-533-2211 Revised 7/12
STANDARD FEATURES:
• Bottom door guide
• Door hanger
• Local mechanical release at cover box
• Sloped-front cover box
• Hinged cover panel for maintenance access
• Vertical lock bar assembly
• ASTM F1643 Certified
Horizontal and Vertical Impact Test-Grade 1
• Prime paint finish
OPTIONAL FEATURES:
PILASTER RELEASE - Hip-high
paracentric keyed mechanical release
mounted in a full-height pilaster adjacent
to the receiving jamb.
Specify “8065LP-1” keyed one side.
Specify “8065LP-2” keyed two sides.
ELECTRIC KEYSWITCH - Paracentric or mogul
keyed local electric control switch mounted below
mechanical release mechanism in pilaster.
Specify “8065LPK-1” paracentric keyed one side.
Specify “8065LPK-2” paracentric keyed two sides.
Specify “8065LPKM-1” for mogul keyed one side.
Specify “8065LPKM-2” for mogul keyed two sides.
HOT DIP GALVANIZED FINISH - Available for
external applications with lift-off cover panel only.
Not available with standard hinged cover panel.
Specify “G” when ordering. Example: 8065LP-1G
NOTE: Cover box minimum length =
(7" overtravel) + (2 x clear opening) + 9".
For doors exceeding 450 lbs. and/or greater than
4’-6” clear opening, contact factory.
THREE HOUR FIRE DOOR RATING
AVAILABLE. Standard cover box calculation does
not apply to fire rated door.
8065L PNEUMATIC
LOCKING SYSTEM
C12
DETAIL A – SLOPED BOX
DETAIL C – PILASTER P2
P-2 PILASTER JAMB SECTION
Pilaster and receiver jamb requires frame opening
to be 7” larger than clear opening.
DETAIL D – BOTTOM DOOR GUIDE SECTION
8065LP-2 Shown
Note: Other system configurations and details are available.
Call Customer Service for more information.
DETAIL B – VERTICAL LOCK BAR JAMB
8065LP– 2 PNEUMATIC SLIDING DOOR SYSTEM
L O C K I N G S Y S T E M S
FOR INDIVIDUAL
SLIDING DOORS
Maximum security.
COVER BOX SECTION
7-1/2” deep x 1’-0-3/4” tall cover box
field welded 1” on 6” top and bottom
090604SouthernFolger_final:INSIDE 8/21/09 5:22 PM Page 48