Southern Folger 3165LX.b ELECTRIC LOCKING SYSTEMS - Manual (Page 2)

P.O. BOX 2021 • SAN ANTONIO, TX • 78297 • 210-533-1231 • FAX: 210-533-2211 Revised 7/12
STANDARD FEATURES:
• Bottom door guide
• Door hanger
• Local mechanical release at cover box
• Sloped-front cover box
• Hinged cover panel for maintenance access
• Vertical lock bar assembly
• ASTM F1643 Certified
Horizontal and Vertical Impact Test-Grade 1
• Prime paint finish
OPTIONAL FEATURES :
PILASTER RELEASE - Hip-high paracentric keyed
mechanical release mounted in a full-height pilaster adjacent
to the receiving jamb.
Specify “3165LX.bP-1” keyed one side.
Specify “3165LX.bP-2” keyed two sides.
ELECTRIC KEYSWITCH -Paracentric or mogul keyed local elec-
tric control switch mounted below mechanical release
mechanism in pilaster.
Specify “3165LX.bPK-1” for paracentric keyed one side.
Specify “3165LX.bPK-2” for paracentric keyed two sides.
Specify “3165LX.bPKM-1” for mogul keyed one side.
Specify “3165LX.bPKM-2” for mogul keyed two sides.
HOT DIP GALVANIZED FINISH - Available for external applica-
tions with lift-off cover panel only. Not available with standard
hinged cover panel. Specify ”G” when ordering. Example:
3165LX.b P-1G
REMOTE PANEL LOCK SYSTEM - Remote panel option is avail-
able with lift-off cover panel only. Not available with standard
hinged cover panel. Specify “RP” when ordering. Example:
3165LX.b
RP
NOTE: Cover box minimum length =
(7" overtravel) + (2 x clear opening) + 9".
For doors exceeding 450 lbs. and/or greater than 4’-6”
clear opening, contact factory.
THREE HOUR FIRE DOOR RATING
AVAILABLE. Standard cover box calculation
does not apply to fire rated door.
3165LX.b ELECTRIC
LOCKING SYSTEM
3165LX.bPKM-2 Shown
Note: Other system configurations and details are available.
Call Customer Service for more information.
B24
DETAIL B – VERTICAL LOCK JAMB BAR
3165LX.bP-2 SLIDING DOOR SYSTEM
DETAIL D – BOTTOM DOOR GUIDE SECTION
DETAIL A – SLOPED BOX
DETAIL C – PILASTER P2
P-2 PILASTER JAMB SECTION
Pilaster and receiver jamb requires
frame opening to be 7” larger than
clear opening.
L O C K I N G S Y S T E M S
FOR INDIVIDUAL
SLIDING DOORS
Maximum security.
COVER BOX SECTION
7-1/2” Deep x 1’-3/4” tall
cover box field welded 1” on 8”
top and bottom.