Southern Folger KR.3 SLIDING DOOR LOCKING DEVICE - Manual (Page 3)

FA Rev. 02-10 D19
For more information, please call 210.533.1231.
Specifications________
s Unlocking system –
Type: Manual door movement.
Motor: 120 VAC, 60 HZ, or 24
VDC.
Hanger and guides: 1/4" thick
steel.
Rollers: Cold formed steel.
Rollers are mounted on hardened
ball bearings protected by
internal grease shields.
Finish: USP.
s Mechanism housing/covers –
Housing: 7-gauge steel.
Housing covers: 10-gauge steel,
hinged to cover.
Vertical lock column housing:
7-gauge steel.
Mechanical release column
(optional): 7-gauge steel.
Wire tray: 16-gauge steel tray.
Front receiver: 10-gauge steel.
Finish: USP.
FOLGER ADAM LOCKING DEVICES Drive: Manual
Release: Individual
and/or Gang
Security
Level:
Medium
KR.3 SLIDING DOOR
LOCKING DEVICE
Dimensional Data_______
Note: Dimensions are for information
and planning purposes only, and should
not be used as templates.
The illustration shown is intended for general
information and planning purposes only. Folger
Adam locking devices are fabricated to the
design of the facility.
Typical KR.3 slope-top elevation.
Left hand (LH) as shown.
Right hand (RH) opposite as shown.