Southern Folger D3B.2 CORRIDOR DOOR OPERATOR - Manual (Page 2)

D28 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297 s Ph: 210.533.1231 s Fx: 210.533.2211
Web: www.SouthernFolger.com s Email: [email protected]
system. For these larger installations,
or those with particular needs,
custom-built consoles may be easily
provided with floor plan graphics
screened on the control panel, and an
array of specialized features.
s G90 galvanized finish available.
FOLGER ADAM LOCKING DEVICES Drive: Rack and Pinion
Release: Remote Electric,
Local Mechanical
Security
Level:
Maximum
D3B.2 CORRIDOR
DOOR OPERATOR
Specifications________
s Drive system –
Type: Rack and Pinion.
Gear motor: 120 VAC, 60 HZ,
1/10 HP.
Hanger and guides: 1/4" thick
steel.
Rollers: Anti-friction ball bearings
with hardened members and
grease shield.
Roller studs: High alloy treated
steel with self-locking nut.
Finish: USP.
s Mechanism housing/covers –
Housing: 7-gauge steel.
Housing covers: 10-gauge steel.
Vertical lock column housing: 7-
gauge steel.
Vertical lock column cover:
10-gauge steel.
Door receiver column
(optional): 7-gauge steel,
equipped with 12 Series lock.
Front receiver: 10-gauge steel.
Finish: USP.
Dimensional Data_______
NOTE: If the optional mechanical
release column is used, the 3"
minimum at the front of the door is
increased to the 7" width of the
mechanical release column and the
“No. 12 lock access to mechanical
operation” is omitted from the
removable housing cover.
Note: Dimensions are for information
and planning purposes only, and
should not be used as templates.
The illustration shown is intended for general
information and planning purposes only. Folger
Adam locking devices are fabricated to the
design of the facility.
(continued from previous page)