Southern Folger D CORRIDOR DOOR OPERATOR - Manual (Page 2)

D24 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297 s Ph: 210.533.1231 s Fx: 210.533.2211
Web: www.SouthernFolger.com s Email: [email protected]
s Electrical interlocking – Wiring and
adaptations may be made to permit
interlocking of two or more doors in a
sallyport or vestibule application.
Prevents electric operation of any
other interlocked door.
s Custom graphic consoles – In many
cases, corridor operators are merely
one part of a complete security
system. For larger installations, or
those with particular needs, custom-
built control consoles may be easily
provided with floor plan graphics
screened on the control panel, and an
array of specialized features.
s Tandem wheel assemblies for doors
over 500 lbs. or excess width.
FOLGER ADAM LOCKING DEVICES Drive: Roller Chain
Release: Remote Electric,
Local Mechanical
Security
Level:
Maximum
D CORRIDOR
DOOR OPERATOR
Specifications_________
s Drive system –
Type: Roller chain.
Motor: 208 VAC, 60 HZ, 1/4 HP.
Roller chain: #41 size.
Hanger and guides: 1/4" thick
steel.
Rollers: Anti-friction ball bearing
with hardened members and
grease shield.
Roller studs: High alloy steel
with self-locking nut.
Finish: USP.
s Mechanism housing/covers –
Housing: 7-gauge steel.
Housing covers: 10-gauge steel.
Vertical lock column housing:
7-gauge steel.
Vertical lock column covers:
10-gauge steel.
Mechanical release column:
7-gauge steel.
Front receiver: 10-gauge steel.
Dimensional Data_______
Note: Dimensions are for information
and planning purposes only, and should
not be used as templates.
The illustration shown is intended for general
information and planning purposes only. Folger
Adam locking devices are fabricated to the
design of the facility.