Southern Folger G OPERATORS SINGLE AND BI-PARTING GATES - Manual (Page 2)

D34 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297 s Ph: 210.533.1231 s Fx: 210.533.2211
Web: www.SouthernFolger.com s Email: [email protected]
s Emergency mechanical operation –
In event of power failure unlocking
the column provides access to the
release mechanism. The door may
then be opened by hand crank.
Optional Features________
s Custom graphic consoles – In many
cases, operators are merely one part
of a complete security system. For
these larger installations, or those with
particular needs, custom-built
consoles or touchscreen controls may
be easily provided with floor plan and
special feature graphics.
Dimensional Data_______
Note: Dimensions are for information
and planning purposes only, and should
not be used as templates.
The illustration shown is intended for general
information and planning purposes only. Folger
Adam locking devices are fabricated to the
design of the facility.
Specifications_________
s Drive system –
Type: Roller chain.
Motor: 120/208 VAC, 60 HZ,
1-1/2 HP.
Roller chain: #60 size.
Trolley hangers: 3 ton capacity.
Locking column: 7-gauge steel
plate construction with swinging-
type door equipped with two #3
hinges, and secured by an 80
Series Deadlock.
s Mechanism housing/covers –
Mechanism cover: 7-gauge steel
plate.
Housing: 7-gauge steel plate.
Gate guides: 5" I-beam with forged
and welded steel guides.
Finish: USP except track, rollers
and drive mechanism.
Trolley track: 8" I-beam x 23
pounds.
Support beams: 6" WF beam x
20 pounds.
FOLGER ADAM LOCKING DEVICES Drive: Roller Chain
Release: Remote Electric &
Local Mechanical
Security
Level:
Maximum
G OPERATORS
SINGLE AND BI-PARTING GATES