LevelOne FPS-1032 - Manual (Page 50)

50
6. Network Print Monitor
Preparation
The print server supports TCP/IP, IPX/SPX and NetBEUI protocols under Windows
95/98/ME/NT4/2000, XP 32bit edition and server 2003 32bit edition. Please make sure that
the following steps have been completed before proceeding with installation under Microsoft
Windows 95/98/ME/NT4/2000, XP 32bit edition and server 2003 32bit edition.
Select A Desired Protocol
TCP/IP
 The TCP/IP Protocol must be installed. For further information, please read “TCP/IP
Protocol Installation” section in this chapter.
Note: If TCP/IP protocol is chosen, please refer to “Assigning an IP Address to the print
server” section later in this chapter.
IPX/SPX
The IPX/SPX-compatible Protocol must be installed. For further information, please read
“IPX/SPX-compatible Protocol Installation” section in this chapter.
NetBEUI
The NetBEUI protocol must be installed. For further information, please read “NetBEUI
Protocol Installation” section in this chapter. The Microsoft Windows XP/2003/Vista/7 does
not support the NetBEUI printing.