LevelOne FPS-1032 - Manual (Page 25)

25
Subnet Mask: This option shows the print server’s current subnet mask maybe obtained
from the DHCP server or manually specified. This option also lets you
manually specify a subnet mask to the print server, if DHCP option is
disabled. This value is optional.
Gateway: This option shows the print server’s current gateway address maybe obtained
from the DHCP server or manually specified. The option also allows you to
manually specify the IP address of the gateway to the print server, if DHCP option
is disabled. This value is optional
Upgrade
Upgrade allows the user to upgrade the print server device. In order to upgrade the unit
please perform the steps as follows:
1. Click Upgrade button just like a picture ＜ ＞, as shown as follow picture
2. S elect General Upgrade. Make sure that the upgrade file is located in the same
directory as PSAdmin.
Reset
1. Click Reset button just like a picture ＜ ＞.
2. Reset allows the user to reset the print server device in order to establish a new
connection or for new settings to take effect.