LevelOne WAP-6013 - Manual (Page 21)

21
Universal Repeater Mode
Universal Repeater is a technology used to extend wireless coverage.
It provides the function to act as Adapter (client) and AP at the same time and can use this
function to connect to a Root AP and use AP(SSID name is same with Root AP ) function to
service all wireless stations within its coverage. All the stations within the coverage of this
access point can be bridged to the Root AP.
SSID (Wireless Network Name): Select “AP” or entry SSID manually to connect.
Security “There are several security types to use:
WEP :
When you enable the 128 or 64 bit WEP key security, please select one WEP key to be used
and input 26 or 10 hexadecimal (0, 1, 2…8, 9, A, B…F) digits.
802.1X
Check Box was used to switch the function of the 802.1X. When the 802.1X function is
enabled, the Wireless user must authenticate to this router first to use the Network service.