LevelOne GES-0852 - Manual (Page 16)

16
PVID
When the VLAN-enabled switch receives a tagged packet, the packet will be sent to
the port’s default VLAN according to the PVID (port VLAN ID) of the receiving port.
Items Functions
Port Port Number 1~8
Egress Select “tagged” in the drop list to enable the PVID checking and
tag inserting of one port, and select “untagged” to cancel.
For example, if an Egress-tagged port receives an untagged
frame, it will be transmitted as a PVID tagged frame. For the detail
tagging status, please refer to the following table.
Untagged Tagged
Packet
Frames In
Packet
Frames Out
Packet Frames In Packet Frames
Out
Untagged Untagged Untagged Tagged (PVID)
Tagged Untagged Tagged (VID) Tagged (VID)
Pri-tagged Untagged Pri-tagged Tagged (PVID)
PVID Port VLAN ID(1~4094)
Only
tagged Enable: block all un-tagged packets from accessing this port.
Disable: All packets are allowed to access this port.