LevelOne GEP-0950 User Manual

Page 51

Text mode
Original mode

Parameter description:

VID:

VLAN identifier. Each tag-based VLAN group has a unique VID. It
appears only in tag-based mode.

Member:

In modify function this is used to enable or disable if a port is a member
of the new added VLAN, “Enable” means it is a member of the VLAN.
Just tick the check box () beside the port x to enable it.

Port:

Port number.

VLAN aware Enabled:

Discard other VLAN group packets, only forward this port joined VLAN
group packets.

Packet Type:



All:

Forward all tagged and untagged packets.



Tagged Only:

Forward tagged packets only and discard untagged packets.

Pvid:

This PVID range will be 1-4094. Before you set a number x as PVID, you
have to create a Tag-based VLAN with VID x. For example, if port x
receives an untagged packet, the switch will apply the PVID (assume as
VID y) of port x to tag this packet, the packet then will be forwarded as
the tagged packet with VID