LevelOne WBR-6803 - Manual (Page 19)

19
3.1.1. Network Setup
1. Ethernet port Configuration:
Off: Disable the Ethernet port.
LAN: The Ethernet port is as LAN port.
WAN: The Ethernet port is as LAN port.
Auto: It will be WAN Port if a DHCP server can be detected on the Ethernet port.
Otherwise, it will be LAN port.
2. LAN IP Address: The local IP address of this device. The computers on your network
must use the LAN IP address of this device as their Default Router. You can change it if
necessary.
3. Subnet Mask: Input your Subnet mask. (All devices in the network must have the same
subnet mask.) The default subnet mask is 255.255.255.0.
4. WAN Interface: Select Ethernet WAN or Wireless WAN to continue.
5. WAN Type: WAN connection type of your ISP. You can click WAN Type combo button
to choose a correct one from the following options: