LevelOne WBR-6801 - Manual (Page 23)

23
Please refer to your documentation or service provider for additional information.
1. Dial-Up Profile: Please select Auto-Detection or Manual to continue.
You can Select “Auto-Detection”, and the Utility will try to detect and
configure the required 3G service settings automatically. Or you can select
“Manual” and manually fill in the required 3G service settings provided by
your ISP.
2. Country: select your country.
3. Telecom: select your telecom.
4. 3G Network: select the 3G Network
5. APN: Enter the APN for your PC card here.(Optional)
6. Pin Code: Enter the Pin Code for your SIM card(Optional)
7. Dial-Number: This field should not be altered except when required by your service
provider.
8. Account: Enter the new User Name for your PC card here, you can contact to your ISP to
get it.
9. Password: Enter the new Password for your PC card here, you can contact to your ISP to
get it.
10. Authentication: Choose your authentication.
11. Primary DNS: This feature allows you to assign a Primary DNS Server, contact to your
ISP to get it.
12. Secondary DNS: This feature allows you to assign a Secondary DNS Server, you can
contact to your ISP to get it.
13. Connection Control: There are 3 modes to select:
Connect-on-demand: The device will link up with ISP when the clients send outgoing
packets.
Auto Reconnect (Always-on): The device will link with ISP until the connection is
established.
Manually: The device will not make the link until someone clicks the
Connect-button in the Status-page.
14. Keep Alive: you can diagnose your connection by it.