LevelOne FCS-1122 - Manual (Page 43)

43
DI/DO
Digital Input: Select Digital Input to have the profile management controlled by an
external sensor. Select profiles from the drop down menu. Profiles will change according
to different trigger voltage levels.
Digital Output: The DO socket allows the IP camera to send output to an external device.
While executing the DO notification action, the IP camera drives voltage on the connected
DO wire to the triggering voltage level for X number of seconds. The connected external
device will then be triggered for X number of seconds.
Triggered Voltage Level - OPEN or GROUND
Users should select the option according to the specification of their external device.
Click Apply or Reset to take effect.