LEDGlow Commercial Lighting Kit User Manual
Page 2
Expanding Your Commercial Lighting Kit:
1.
The included Control Box can power up to seven 40 inch tubes. If you are adding more than seven tubes, an expansion
driver and power supply are required. Additional tubes and expansion drivers are available a
Remote Functions:
Button Controls
On – Turns Kit On
Off – Turns Kit Off
Step – Color Cycle Mode
Color – Color Scan Mode
Fade – Color Fade Mode
Sleep – Press Once for Kit to Turn Off After One Hour. Press Twice for Kit
to Turn Off After Two Hours.
Pause – Pauses the Kit on any Solid Color
Single Arrow – Slow Pattern Speed
Double Arrow – Medium Pattern Speed
Triple Arrow – Fastest Pattern Speed
Music – Music Mode
Red Arrows – Adds More Red to Selected Color
Green Arrows – Adds More Green to Selected Color
Blue Arrows – Adds More Blue to Selected Color
White – Sets Kit to Solid White
Numbered Buttons 1-7 Programmable Solid Colors
Press the MEM Button and the Kit will Flash Once. Press the Number where
you would like to Save the Solid Color. The Kit will Flash Twice when
Color is Saved.
Dimmer – Sets Kit to Four Different Brightness Levels:
100% - Maximum Brightness
Level 1 – 75% Brightness
Level 2 – 50% Brightness
Level 3 – 25% Brightness