LEDGlow 4pc.-10pc. Million Color Wireless LED Underbody Kit - Manual (Page 3)

Adding or replacing your wireless remote
1. The included wireless remote is already pre-programmed. This setup is only needed when replacing an existing remote or by adding additional remotes to your
system. You may program up to 3 remotes to each control box.
2. In order to program the remote to the control box you must turn the kit off.
a.
First Remote - Press and hold the mode button on the remote and the mode control box on the control box for 5-7 seconds. Test the operation with the
remote.
b. Second Remote - Press and hold the mode button on the remote and the mode control box on the control box for 5-7 seconds. Test the operation with the
remote.
c. Third Remote - Press and hold the mode button on the remote and the mode control box on the control box for 5-7 seconds. Test the operation with the
remote.
Once you have installed your LED lighting kit, power the kit on using the 4 button wireless remote or the buttons located on the control box to
ensure that it is fully functional.
Using the Control Box & 4 Button Wireless Remote
Power Button

Pressing this button on the control box or wireless remote will turn your
kit on and off.
Speed Change Button

Pressing this button on the control box or wireless remote will allow you to
select from 5 different speeds for your selected pattern.

If your kit is in music mode, this button will adjust the sensitivity of the
selected music mode.
Changing Color Button

Pressing this button on the control box or wireless remote will allow you
to select from 18 solid color modes, as well as 1 color cycle mode. The
available colors are listed below:

Blue

Red

Green

Orange

Yellow

Purple

Pink

White

Teal

Light Green

Light Blue

Violet

Lime Green

Medium Blue

Pale Green

Baby Blue

Fuchsia

Lavender
Mode Button
 Pressing this button on the control box or wireless remote allows
you to change the current pattern displayed on your kit. There are
12 distinct patterns, as well as 5 unique music modes. The
patterns are listed below:

Solid Illumination Mode

Flashing Mode

Flashing Front Chase

Flashing Back Chase

Steady Front Chase

Steady Back Chase

Front Running Chase Mode

Back Running Chase Mode

Outside to Inside Flash

Inside to Outside Flash

Flash Pattern

Flash Pattern

(5) Sound Activation Modes
For accessories, replacement parts and/or technical support please visit www.LEDGlow.com for more information.