Jackco Power Post Model 892 - Manual (Page 4)

PRODUCT DESCRIPTION
Power Post is designed for the rated capacity lifting and pulling jobs. This power post can shall used
with common pot patterns. Operator can create their own custom pull system. A wide variety of
applications exist for this category of product. Special skill, knowledge and training may be required for
a specific task and the product may not be suitable for all the jobs described above. Unsuitable
applications would include applications that call for a device to move, level or support persons, animals,
hazardous materials, mobile homes/ dwellings in general, mirrors and/or plate glass, and/or to
connect/secure hatches, components, etc. between bulkheads. The user must ultimately make the
decision regarding suitability of the product for any given task and assume the responsibility of safety for
him and others in the work area.
SPECIFICATIONS
Power Post Frame Ram
Model Capacity
Height
Base Size
( L x W)
Floating
Pulley
Position
Stroke
892 10 ton 68.5" 33" x 16" 12 8"
Figure 1 – Chain Routing Instruction
ƒ If oil leakage is detected, discontinue use of the
ram immediately. The ram could develop excessive
pressure and cause the ram, hose or coupler to burst
which could cause serious injury or death.
ƒ When loading a ram, always insure that coupler,
port, and adapter threads have not been damaged.
Failure to do so could cause serious injury or death.
3