ION Audio Block Party - Manual (Page 2)

2
Quickstart Guide (English)
Support
For product registration, visit the ION website: ionaudio.com
For the latest information about this product, visit
ionaudio.com/blockparty
For additional product support, visit ionaudio.com/support
For safety/warranty information, visit ionaudio.com/warranty
WARNING: DO NOT splash or immerse in water or other liquids.
Not for use in rain. Use only in dry locations.
WARNING: DO NOT look directly into the dome light.
Do not sit, stand, or apply pressure on the dome light.
Rechargeable Batteries
Rechargeable lead-acid batteries are the same type used in automobiles. As with your car battery, how you use this
battery has a significant impact on its lifespan. With proper use and treatment, a lead-acid battery can last for years.
Here are some recommendations for getting the longest life from the internal battery.
GENERAL USAGE
• FULLY CHARGE THE BATTERY BEFORE USING IT.
• CHARGE THE BATTERY COMPLETELY AFTER EACH USE.
STORAGE
• For best product longevity, do not store at exceedingly hot (greater than 90F (32C)) or exceedingly cold
(less than 32F (0C)) temperatures.
• It is acceptable to leave your sound system plugged in. This will not overcharge the battery.
• If you leave the battery level low and do not charge it for 6 months, it may permanently lose capacity.
REPAIR
• If the battery fails to charge, check your fuse near the power cable input. If your fuse is intact and it still
will not charge, contact ION Audio at ionaudio.com.
DISPOSAL
• Bring the unit to a recycling center or dispose of in accordance with local ordinances.
Quick Setup/Connection Diagram
1.
Make sure all items listed in Box Contents at the beginning of this guide are included in the box.
2. READ SAFETY INSTRUCTION BOOKLET BEFORE USING THE PRODUCT.
3. For optimal performance, place Block Party in the center of the room so it is unobstructed by walls, furniture,
etc.
4. Move Light Mode switch to OFF.
5. Turn down the Master Volume on the Block Party.
6. Turn on Block Party.
7. Connect your music player with an audio cable or Bluetooth. (see Connecting with a Bluetooth Device for more
details on this)
8. Adjust the volume on your music player and on Block Party as needed.
9. Adjust the Light Mode switch on Block Party as needed.
10. Turn off Block Party when not in use.
BOX CONTENTS

Block Party
 Microphone with mic cable
 Audio Cable with 1/8” (3.5mm)
connectors
 Power Cable (standard IEC)
 Quickstart Guide
 Safety Instructions & Warranty
Information Booklet
TOP PANEL
MICROPHONE
MP3 PLAYER
(not included)
MICROPHONE
REAR PANEL
POWER