Inter-M DPA-230DC - Manual (Page 16)

Rated Output Power (1kHz, 33.3Ω)
Rated Output Power (T.H.D 0.1%, AES17) 300W 300W x 2CH
Output Voltage/Impedance 100V / 33.3Ω
Input Sensitivity/Impedance 1V / 10 KΩ Balance
T.H.D (ASE17)
Rated (300W, 1kHz) Less than 0.1 %
Prated (100W, 1kHz) Less than 0.03%
S/N (20kHz LPF, A-WTD) Over than 100 dB
High Frequency Response (1W ,+1dB, -3dB) Over than 20 kHz
Low Frequency Response (1W, -3dB±2dB)
High Pass Filter Off 65Hz
High Pass Filter On 400Hz
Operating Temperature -10°C ~ +40°C
Power Source DC24V, AC 220-240V 50/60HZ
Power Consumption ( Pmax ) 150W
Weight (Set) 6.8kg / 14.9lb 8.3kg / 18.2lb
Dimensions (Set) 482(W) x 44(H) x 420(D)mm/19(W) x 1.7(H) x 16.5(D)in
* Specifications and design subject to change without notice.
* Power consumption is different that depending on number of amplifier modules.
1CH/2CH DIGITAL POWER AMPLIFIER
14 DPA-130DC/230DC
Specifications Specifications
DPA-130DC DAP-230DC
1
3
1
8