Inter-M HDMX-1104 - Manual (Page 8)

MULTI INPUT HD AV MIXER
6
HDMX-1104
6. PROGRAM CHANNEL SELECT BUTTON
- Button selects the channel sent to the main output. If channel is selected, the LED will be on. Video of
selected channel will be transmitted to the screen. (Only one channel can be set to the program channel,
LED of previous channel will be off.)
- When using the PIP, DSK, CROMA-Key functions, these buttons are used to selects the special effects and
input channels to be shown on the output screen, in this case, LEDs of all selected channels will be on.
- If you select the ‘OFF’ button, output screen will be turned off.
7. NEXT CHANNEL SELECT BUTTON
- This Button selects the next output channel. If channel is selected, the LED will be on. The selected video
channel will be sent to the main output when selected effect is activated. (Only one channel can be set to
the next channel, LED of previous channel will be off.)
Ex) Assuming that the program channel is set to channel no. 1 and the next channel is set to channel no. 2,
apply a screen effect by using the automatic or manual function, channel no. 2 video will be sent to the
main output and replace video channel no.1.
- If you push the ‘OFF’ button, next screen will not be selected.
8. MANUAL EFFECT FADER LEVER (FADER T-BAR)
- Using the T-bar lever allows to manual control the transition of the selected effect. The entire effect time and
speed occurs from moving the T-bar from one side to the other.
(Caution) Always leave T-Bar set to one end. If T-Bar is left located between its two ends, the HDMX thinks
that the user is executing a manual transition, automatic effects will stop at the related T-bar
location.
9. AUTOMATIC SCREEN TRANSITION SWITCH
- CUT: immediately switches (cuts) between selected video channels.
- TAKE: This button automatically executes the selected transition effect. Effect will be executed according to
the selected pattern/direction/object/speed.
10. SPECIAL EFFECT SWITCH
- DSK: The “Downstream Keyer” switch permits the insertion of graphics, title and caption over the final
output video layer. The DVI input channel is dedicated to the DSK. The DSK is independent of all other
effects and is combined over the overall final layer.
- PIP: The “Picture in picture” switch, allows the displays of two live video outputs one smaller image over a
full screen image.
- C-KEY: The “Chroma-Key” switch allows the layering of two live video image compositing on image over a
back ground image by using color or brightness differences.
* Refer to page 14~17, Setup of special effect switch for detail information.