Zone 3 gateway, Zone 2 gateways – Avaya IP600 User Manual
Page 17

SVS; Reviewed:
WCH/MI 6/20/02
Solution & Interoperability Test Lab Application Notes
© 2002 Avaya Inc. All Rights Reserved.
17 of 20
Gatekeeper-ext.doc
zone local Gk-3660 avaya.com 10.30.1.2
zone remote clan-IP600-gk avaya.com 10.9.1.4 1719
zone prefix clan-IP600-gk 69* !! Zone 3’s route pattern being sent to Zone 1
zone prefix clan-IP600-gk 77*
gw-type-prefix 66* gw ipaddr 10.20.1.2 1720
gw-type-prefix 62* gw ipaddr 10.20.1.2 1720
no shutdown
9.6. Zone 3 Gateway
The Gateway configuration and dial-peers for the new Gateway (Gateway C) in Zone 3.
interface FastEthernet0/0
ip address 10.70.1.2 255.255.255.0
speed auto
full-duplex
h323-gateway voip interface
h323-gateway voip id Gk-3660-2 ipaddr 10.60.1.2 1718 !Point at 2
nd
Cisco Gatekeeper
h323-gateway voip h323-id 2nd-1751-gw
!
voice-port 2/0
!
voice-port 2/1
!
dial-peer voice 69 pots ! Extension 69xx is local to Zone 3
destination-pattern 6900
port 2/0
forward-digits all
!
dial-peer voice 691 pots
destination-pattern 6901
port 2/1
forward-digits all
!
dial-peer voice 77 voip
destination-pattern 77..
session target ras
codec g711ulaw
!
gateway
9.7. Zone 2 Gateways
The Gateways in Zone 2 (Gateway A and Gateway B) require an additional “dial-peer” in their
configuration. This dial-peer allows the new (69..) dial pattern to be sent to the local