IDEC FL1E SmartRelay - Manual (Page 306)

Applications
292 IDEC SmartRelay Manual 
Block diagram of the IDEC SmartRelay solution
Advantages of the IDEC SmartRelay solution
• You can connect the lamps directly to the IDEC
SmartRelay, provided the power consumption does not
exceed the switching capacity of the various outputs.
Higher loads should be switched with a contactor relay.
• Connect the daylight control switch directly to an input of
the IDEC SmartRelay.
• You do not need an external timer, because this function
is integrated in the IDEC SmartRelay.
• Due to the reduced amount of switchgear, you can install
a smaller and space-saving distribution cabinet.
• Fewer devices are required
• The lighting system can be easily modified.
• Additional switching times can be set as required
(sequential circuit for the off pulses at the end of the day).
• The function of the daylight control switch can be easily
applied to all lamps or to a modified group of lamps.
x
T=
1s
I5
T=
1s
x
I5
I1
I2
I3
I4
x
x
Off pulse triggered with timer
Mo..Su 
20:00 -- 20.01
Mo..Su

21:00 -- 21.01
Off pulse triggered with daylight control switch
Daylight
control
switch
Luminous row 3
Corridor side

Q3
Luminous row
4 Corridor side

Q4
Luminous row 1 
Corridor side
Q1
Luminous row 2 
Corridor side 
Q2