ID Innovations Classic Line Series Magnetic Stripe Readers - Manual (Page 16)

Features
16
Send 6 Bit Field Separator '^' As ^ DEC 94 HEX 5E
Classic Line: ; Value Line: ;
This option allows you to change the separator character that is sent for tracks encoded with 6 bit data. You may specify
any valid character for the Keyboard Country that is currently selected. This is a one character input field, press the key
that represents the character or use an ALT keypad sequence to specify the character. For instance, to specify DEC 125,
press and hold the ALT key while pressing and releasing the 1, 2 and 5 keys on the numeric keypad. Or you may select
the character from the Combo box in the Universal Programmer to specify the character for the Value Line readers. This
option has no effect if the Data Output Mode is set to FIELD DATA.
Send 4 Bit Field Separator '=' As = DEC 61 HEX 3D
Classic Line: ; Value Line: ;
This option allows you to change the separator character that is sent for tracks encoded with 4 bit data. You may specify
any valid character for the Keyboard Country that is currently selected. This is a one character input field, press the key
that represents the character or use an ALT keypad sequence to specify the character. For instance, to specify DEC 125,
press and hold the ALT key while pressing and releasing the 1, 2 and 5 keys on the numeric keypad. Or you may select
the character from the Combo box in the Universal Programmer to specify the character for the Value Line readers. This
option has no effect if the Data Output Mode is set to FIELD DATA.
Send Track 2 Start Sentinel '%' As + DEC 37 HEX 25
Classic Line: Value Line: ;
This option allows you to specify the character to substitute for the track 2 start sentinel so that you can distinguish track 2
data from track 1 data. This is a one character input field, select the character in the Combo box in the Universal
Programmer to specify the character.
Note: Changing the setting for this option will have no effect if the Send Start & End Sentinels option is OFF.
Send Track 3 Start Sentinel ';' As + DEC 43 HEX 2B
Classic Line: ; Value Line: ;
This option allows you to specify the character to substitute for the track 3 start sentinel so that you can distinguish track 3
data from track 2 data. This is a one character input field, press the key that represents the character or use an ALT
keypad sequence to specify the character. Or you may select the character from the Combo box in the Universal
Programmer to specify the character for the Value Line readers. This option has no effect if the Data Output Mode is set
to FIELD DATA.
Note: Changing the setting for this option will have no effect if the Send Start & End Sentinels option is OFF.
Send Track 3 Start Sentinel '%' As % DEC 37 HEX 25
Classic Line: ; Value Line: ;
This option allows you to specify the character to substitute for the track 3 start sentinel so that you can distinguish track 3
data from track 1 data. This is a one character input field, press the key that represents the character or use an ALT
keypad sequence to specify the character. Or you may select the character from the Combo box in the Universal
Programmer to specify the character for the Value Line readers. This option has no effect if the Data Output Mode is set
to FIELD DATA.
Note: Changing the setting for this option will have no effect if the Send Start & End Sentinels option is OFF.
Send Track 3 Start Sentinel '!' As ! DEC 33 HEX 21
Classic Line: Value Line: ;
This option allows you to specify the character to substitute for the track 3 start sentinel so that you can distinguish track 3
data. . This is a one character input field, select the character in the Combo box in the Universal Programmer to specify
the character.
Note: Changing the setting for this option will have no effect if the Send Start & End Sentinels option is OFF.