C. heater water, Part 2, Prepare the water heater – HTP SSU-20PH User Manual
Page 4: A. dimensions and specifications, B. locating the water heater, Part 2 – prepare the water heater
4
LP-21A Rev. 3.24.14
C. HEATER WATER
Do not use petroleum-based cleaning or sealing compounds in a water heating system. Gaskets and seals in the
system may be damaged. This can result in substantial property damage.
Do not use “homemade cures” or “heater patent medicines”. Damage to heater, substantial property damage,
and/or serious personal injury may result.
PART 2 – PREPARE THE WATER HEATER
UNCRATING HEATER
– Any claims for damage or shortage in shipment must be filed immediately against the
transportation company by the consignee.
COLD WEATHER HANDLING
– If the heater has been stored in a very cold location (BELOW 0
o
F) before installation,
handle with care until the plastic components come to room temperature.
Remove all sides of the shipping crate to allow the heater to be moved into its installation location.
A. DIMENSIONS AND SPECIFICATIONS
Figure 1
B. LOCATING THE WATER HEATER
If the pool heater is to be located outdoors, it must be in a covered area, protected from the rain and sun.