beautypg.com

Chapter 3 – pcie card installation steps, Figure 1, Figure 2 figure 3 – Sonnet Technologies Echo Express SE Thunderbolt Expansion Chassis User Manual

Page 8

background image

4

Chapter 3 – PCIe Card Installation Steps

Figure 1

1. Remove the Echo Express SE chassis from its packaging, and then set it

upside-down on a soft, flat, level surface.

2. Remove and set aside the two screws securing the bottom of

the outer case to the inner assembly

(Figure 1).

3. Turn the Echo Express SE chassis right-side-up, with the back facing

you

(Figure 2).

4. Remove and set aside the two screws securing the

back edge of the outer case to the inner
assembly

(Figure 2).

5. Without squeezing it, place your hand on top of the

outer case. Remove the inner assembly by gently
grasping its faceplate by the edges and
pulling

(Figure 3). Set aside the outer

case.

Support Note:

To avoid damaging components

due to static electricity discharge, wear an antistatic

wrist strap while working inside Echo Express SE.

Figure 2

Figure 3

Inner

Assembly

Outer

Case