Sonnet Technologies Fusion R400S RAID (Without Drives) - Manual (Page 11)

Tips and Additional Information
• Follow the instructions in this manual carefully; contact your
reseller or local distributor for additional advice not covered in
this User’s Guide.
Contacting Sonnet Customer Service
USA Customers
The Sonnet Web site located at www.sonnettech.com has the
most current support information and technical updates. Before
you call Sonnet Customer Service, please check our Web site for
the latest updates and online support files, and check this User’s
Guide for helpful information. When you call Sonnet Customer
Service, have the following information available so our customer
service staff can better assist you:
• Product name
• Date and place of purchase
• Hard drive model(s)
• Computer model
• Operating system
• Software/firmware versions
If further assistance is needed, please contact Sonnet Customer
Service at:
Online Service Form: http://serviceform.sonnettech.com
Tel: 1-949-472-2772
(Monday–Friday, 7 a.m.–4 p.m. Pacific Time)
E-mail: [email protected]
For Customers Outside the USA
For support on this product, contact your reseller or local
distributor.
Visit Our Web Site
For the most current product information and online support
files, visit the Sonnet Web site at www.sonnettech.com/support/.
Register your product online at http://registration.sonnettech.
com to be informed of future upgrades and product releases.
Specifications
Compatibility Compatible with Mac,
Windows, and Linux computers
with an eSATA interface
External Connector One locking eSATA
Data Transfer Speed Up to 240 MB/s, depending
on interface used and drive
configuration
OS Support Platform independent
Supported Drive
Configurations
Hardware-based RAID 0, 5, and
10; span, clone, and JBOD (1)
Power Supply Universal 220W, 100–240V AC,
50–60Hz
Operating Temperature 32 to 104˚ F (0˚ C to +40˚ C)
Dimensions (WxDxH) 17.0 x 16.25 x 1.75 in.
(43.2 x 41.3 x 4.4 cm)
Weight (with drives,
approximate)
20.2 lbs (9,16 kg)
RoHS Compliant Yes
Package Contents • Rackmount disk enclosure
• Four 3.5" drive trays
• One locking eSATA data cable
• Power cord
• User's guide
• Tube of threadlocker
• Drive mounting screws
1. JBOD operation requires the use of an eSATA controller with
port multiplier support.
SAFETY PRECAUTIONS
Please read this section carefully before proceeding. These
precautions explain the correct and safe use of this device,
thereby helping to prevent injury to you or others, and also help
you to minimize the risk of damaging the device.
Warnings
Always follow the basic warnings listed here to avoid the risk of
serious injury or death from electrical shock, short-circuiting, fire,
and other hazards. These warnings include, but are not limited to:
• With the exception of the user-swappable parts, do not attempt
to disassemble or modify the enclosure. If this device appears to
be malfunctioning, contact your reseller or local distributor.
• Do not drop the enclosure; dropping or mishandling of the
enclosure or adapter card may result in a malfunction leaving
the product inoperable.
• Do not expose the device to rain, use it near water or containers
that contain liquids which might spill into any openings, or in
damp or wet conditions.
• If unusual smells, sounds, or smoke come from the device, or if
liquids enter it, switch it off immediately and unplug it from the
electrical outlet.
9