Argus Camera Argus DC-5190 - Manual (Page 21)

21
you need to reassign the name for the
removable flash disks:
Right click Manage Disk
Management. Right click blue bar of
removable disk which is on line Change Drive
Letter & Paths Change Assign the Following
Drive Letter (assign an unused drive name) OK
Open the new renamed removable flash drive
to download recorded pictures
Subject in recorded image is too dark
Insufficient light for shooting Set the flash On,
or adjust the exposure compensation to a
Flickering on lcd screen or recorded image
Incorrect frequency setting Check the correct
anti-flicker frequency ( 50Hz or 60Hz ) under
fluorescent light setting.
Picture download problem
Flash disk does not display images recorded.
The camera will load two removable flash
drives on your computer under MSDC mode.
The first drive is the external SD or MMC
cartridge and the second drive is the recorded
images saved in the built-in memory of the
camera. In cases when the removable flash
positive (+) setting.
drive names coincide with those already
assigned by the computer in the network,