Argus Camera Argus DC-5190 - Manual (Page 13)

13
Download Images to a Computer
Enter preview mode and connect the camera
to the computer via the USB cable. You will not
need to install a driver for image download if
you use Windows 2000/ME/XP. Simply connect
the camera to PC, the LCD screen will display
“MSDC” and the camera will be recognized as
a removable disk, allowing you can directly copy
the pictures from the camera to your computer.
If you are using Windows 98SE, you must install
the camera driver before attaching the camera
to the computer. To install the camera drivers,
please refer to the section on Installing Drivers.
After the driver is installed, connect the camera
to PC in while in preview mode and the
computer will find a USB mass storage device
and install the device driver automatically. After
this process is complete, the camera will be
recognized as a removable disk and the pictures
can be copied to the computer.
Driver Installation
Insert the accompanying CD into the CD-ROM
drive and it should automatically open a Menu
screen (shown below)