Audiovox AFX-1000 User Manual

Page 26

2 TERM ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Press the START key if you want your machine

to send

your Sender ID Message at the top of each

transmitted page.

Or press the

TOP

key if you don‘t want this message sent, then proceed to step 6.

3. TERM ID INSIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . YES/NO?

Press the START key if you want the Sender ID Message within the top area of the document.

Or press the STOP key if you want a space added to the top of the transmitted documents for the

printing of the Sender ID Message.

4. RTI (Receive Terminal Identification). YES/NO?

Press the START key if you want your machine to print an RTI (Receive Terminal Identification)

message at the bottom of each page you receive.

Or press the STOP key if you don’t want this message printed.

5. Group

Press the START key if your machine is having difficulty in transmitting clear copies and you

suspect it may be due to poor telephone line conditions. This will allow your machine to transmit

only in the CCITT Group 2 mode which may help to correct the problem. (See page 6.)

Or press the STOP key to allow the machine to transmit at the normal CCITT Group 3 mode. (If the

remote unit is Group 2 only, your machine will automatically switch to Group 2.)

6. MESSAGE CONFIRMATION REPORT.. YES/NO?

Press the START key if you want your machine to print out a Message Confirmation Report after

each transmission.

Or press the STOP key if you don’t want this report to print after each transmission.