SilverStone ST45SF-G - Manual (Page 5)

SFX Form Factor
07
6. SAFETY
7. ELECTROMAGNETIC COMPATIBILITY (EMC)
5.3 Altitude
Operating
Storage
10,000FT max.
50,000FT max.
6.1 Underwriters Laboratory (UL) recognition.
The power supply designed to meet UL 1950.
6.2 The power supply must bear the German Bauart Mark from TUV .
7.1 IEC 61000-4-2 ESD LEVEL X20KV4.
7.2 IEC 61000-4-3 radiated electrical field requirement.
7.3 IEC 61000-4-4 BURST.
7.4 IEC 61000-4-5 surge Voltages.
7.5 EN 61000-3-2 harmonic current emissions.
If applicable to sales in Japan or Europe, the power supply shall meet the requirements
of EN 61000-3-2 class D and the guidelines for the suppression of harmonics in appliances
and general use equipment class D for harmonic line current content at full-rated power.
7.6 EN55022 class B radio interference (CISPR 22)
7.7 FCC part 15, subpart J class B 115VAC operation.
5.2 Shipping and Storage
Temperature
Relative Humidity
-20 to 60 C
to 95%,non-condensing
O
5. ENVIRONMENT
5.1 Operation
Temperature
Relative Humidity
0 to 40 C
to 85%,on-condensing
O
08
9. MECHANICAL REQUIREMENTS
9.1 Physical Dimension
125 mm (W) × 63.5 mm (H) × 100mm (D)
9.2 Connectors
M/B 24PIN connector
EPS 12V 8PIN connector
Orange
Blue
Black
Green
Black
Black
Black
White
Red
Red
Red
Black
Yellow
Yellow
Yellow
Yellow
Signal
+12V
+12V
+12V
+12V
Pin
5
6
7
8
Pin
1
2
3
4
Signal
COM
COM
COM
COM
Black
Black
Black
Black
Signal
+3.3V
-12VDC
COM
PS-ON
COM
COM
COM
N/C
+5VDC
+5VDC
+5VDC
COM
Pin
13
14
15
16
17
18
19
20
21
22
23
24
Pin
1
2
3
4
5
6
7
8
9
10
11
12
Signal
+3.3V
+3.3V
COM
+5VDC
COM
+5VDC
COM
PWRGOOD
+5Vsb
+12V
+12V
+3.3V
Orange
Orange
Black
Red
Black
Red
Black
Grey
Purple
Yellow
Yellow
Orange
8. MTBF
8.1 MTBF (mean time between failures) calculation
The demonstrated MTBF shall be 100,000 hours of continuous operation at 25 oC of full
load at normal AC input.The MTBF of the power supply shall be calculated in accordance
with MIL-HDBK-217F. The DC FAN is not included.