Specifications, Installing/replacing batteries, Replacement parts – Robinair 16600 Electronic Leak Detector User Manual
Page 7: Maintenance
1
© 2000 Robinair, SPX Corporation
6
Specifications
Power Supply .............................................................. 4 “AA” alkaline batteries
Sensitivity ..................................................................... Less than
1
/
2
oz. per year
Battery Life ................................................................... Approximately 25 hours
Dimensions ........................................................................ 8
1
/
2
"L x 3
1
/
4
"W x 2"D
............................................................................... (21.59 cm x 8.26 cm x 5 cm)
Probe Length ...................................................................... 16 inches (40.6 CM)
Weight ................................................................. 1.14 lbs. (.52 kg) with batteries
Installing/Replacing Batteries
Your unit uses four (4) “AA” alkaline batteries. The batteries should be replaced
if the top LED (beside the words LOW BATTERY) lights up when the unit is
first turned on. The battery compartment is located on the back of the case.
1. Turn the ON/OFF switch to OFF.
2. Remove the screw holding the battery compartment door. If you are
replacing batteries, remove the old batteries.
3. Place the new batteries in the battery compartment, following polarity
indication.
4. Replace the battery compartment door, and secure the door with the screw.
Replacement Parts
16503
Replacement Sensing Tip
16604
Battery Compartment Door
Maintenance