Robinair 19740 Inline Strainer Fitting - Manual

• Disconnect hoses using extreme caution!
Pressurized refrigerant may be present
in hoses. Point hoses away from you and
anyone nearby.
• Wear safety goggles when working with
refrigerants. Refrigerants can cause eye
injury.
WARNING
• Unplug the station before beginning
service work. Incorrect use or connections
can cause electrical shock.
19740 Inline Strainer Fitting
562662 (Rev. A, November 16, 2011) © 2011 SPX
Because of ongoing product improvements, we reserve the right to
change design, specifications, and materials without notice.
☎
For more information, call TOLL-FREE
1-800-822-5561 in the continental U.S. and Canada.
In all other locations, contact your local distributor.
655 EISENHOWER DRIVE
OWATONNA MN 55060
CUSTOMER SERVICE : 1-800-533-6127
FAX : 1-800-322-2890
TECHNICAL SERVICE : 1-800-822-5561
FAX : 1-866-259-1241
WEBSITE : WWW.ROBINAIR.COM
Instructions
Installation
1. Install inline strainer on liquid port of source tank.
2. The low-side adapter will be used for machines
without a tank fill hose. Connect source fill hose to
fitting.
Cleaning the Strainer Tip
1. Unscrew fitting and remove strainer tip.
2. Blow debris out of strainer tip with an air hose
until clean.
3. Assemble fitting.
4. Install onto tank.
Connect to
fill hose
Connect to
tank valve
Strainer tip