Warning – Rivers Edge RE761 TREE SEAT TREE LAX LOUNGER User Manual

Page 2

TREESTANDS

Tree lax lounger ground Tree seat (re761)

Page

HuntRiversEdge.com

800-450-edge (3343)

rivers edge Treestands are engineered with you the hunter in mind.
We appreciate your purchase of one of our world class ground seats.
Follow these few simple instructions and your ground seat will pro-
vide you many years of trouble-free pleasure. Instructions should be
kept in a safe place and reviewed at least annually.
If for any reason you have a problem with your product,

do noT

return to the retailer, contact the rivers edge customer service
department at 800-450-eDGe (3343) for assistance.

asseMBly insTruCTions

Tools needed – two 7/16" wrenches

1. Attach the tree hugger weldment (48078) to the seat frame weldment

using (1) provided 1/4-20 x 2-1/4” bolt, locknut and metal washer.

see

Figure 1. TigHTen seCurely.

2. Attach the backrest weldment (48075) to the seat frame weldment (48081)

using (2) provided 1/4-20 x 1-3/4” bolts and locknuts.

see Figure 1.

TigHTen seCurely!

NOte: Pay special attention to orientation of both parts. See FIGURe

3. Attach the (2) provided 9” camo sleeves (48873) to each arm rest portion

of seat frame by wrapping around metal tubing and attaching Velcro of
camo sleeves together with Velcro on seat straps.

4. Attach backrest portion of seat to the backrest weldment by wrapping

Velcro loops around metal tubing and securing together.

warning

THis Tree seaT is designed To Be used aT a
HeigHT THaT allows THe user’s FeeT To Be on
THe ground aT all TiMes wHen in use. use as
a ground seaT only. Failure To Follow all in-
sTruCTions Provided and use as a ground seaT
only May resulT in serious inJury or deaTH!
read, undersTand and Follow all asseMBly,
insPeCTion, MainTenanCe, & use insTruCTions
Provided BeFore eaCH use. Failure To Follow
all warnings and insTruCTions Could resulT
in serious inJury or deaTH.
do noT CrusH TuBing wHen TigHTening BolT as-
seMBlies! idenTiFy and FaMiliariZe yourselF
wiTH all ParTs BeFore you sTarT.
iF any insTruCTions are noT undersTood or iF
you Have a ParTs issue Call 800-450-edge (3343)
BeFore using.
do noT eXCeed THe ToTal Field raTing- 300 lBs.
douBle CHeCK asseMBly sTePs To Be CerTain
you Have CorreCTly asseMBled THis ProduCT.
sTudy your new Tree seaT To BeCoMe FaMiliar
wiTH all oF iTs FeaTures and design. aT ground
level, Following Provided use insTruCTions,
PraCTiCe aTTaCHing ground seaT To Tree and
reMoving FroM Tree. save THese insTruCTions
For FuTure reFerenCe.
never aTTaCH ground seaT To a dead, odd-
sHaPed, leaning, diseased, loose-BarKed Tree
or uTiliTy Poles.
read and PerForM all MainTenanCe TasKs as
desCriBed in insPeCTion and MainTenanCe.

Figure 1

backrest weldment

1/4-20 lock nut

1/4 washer

tree hugger weldment

1-3/4" bolt

2-1/4" bolt

seat loop weldment

#8-X 1/2 phillips pan head screw

flat M4 washer