3 no remote image, 4 poor image quality, Altinex policies – Altinex DITTO-AMP User Manual
Page 9: 1 limited warranty/return policies, 2 contact information, Distribution amplifier
DISTRIBUTION AMPLIFIER
400-0045-006
8
8.3 NO REMOTE IMAGE
Cause 1:
The source has a problem.
Solution:
Check the image on a local monitor
and verify the quality is good. If the
local image is good, see Cause 2.
Cause 2:
Cable connections are incorrect.
Solution:
Make sure that all the cables are
connected properly and that the
continuity and wiring are good. If
there is still no image, call ALTINEX
at (714) 990-2300.
8.4 POOR IMAGE QUALITY
Cause 1:
The source has a problem.
Solution:
Check the image on the local
monitor and verify the quality is
good. If the local image is good, see
Cause 2.
Cause 2
Signal transmission is poor.
Solution:
Check the cables for continuity and
make sure that connections are
wired properly. If the image is still
not correct, call ALTINEX at
(714) 990-2300.
ALTINEX POLICIES
9
9.1 LIMITED WARRANTY/RETURN POLICIES
Please see the ALTINEX website at
for details on warranty and
return policies.
9.2 CONTACT INFORMATION
ALTINEX, Inc.
592 Apollo Street
Brea, CA 92821 USA
TEL: 714 990-2300
TOLL FREE: 1-800-ALTINEX
WEB:
E-MAIL: