Safety, Safety precautions – Ransburg RCS-100FP Fluid Pump Kit 70945 User Manual

Page 5

LN-9227-00

SAFETY PRECAUTIONS

Before operating, maintaining or servicing any
ITW Ransburg coating system, read and under-
stand all of the technical and safety literature for
your ITW Ransburg products. This manual
contains information that is important for you to
know and understand. This information relates
to USER SAFETY and PREVENTING EQUIP-
MENT PROBLEMS. To help you recognize this
information, we use the following symbols.
Please pay particular attention to these sec-
tions.

A WARNING! states information to alert you

A WARNING! states information to alert you
to a situation that might cause serious injury

to a situation that might cause serious injury

to a situation that might cause serious injury
if instructions are not followed.

if instructions are not followed.

A CAUTION! states information that tells

A CAUTION! states information that tells
how to prevent damage to equipment or

how to prevent damage to equipment or

how to prevent damage to equipment or
how to avoid a situation that might cause

how to avoid a situation that might cause

how to avoid a situation that might cause
minor injury.

minor injury.

A NOTE is information relevant to the proce-

A NOTE is information relevant to the proce-
dure in progress.

dure in progress.

While this manual lists standard specifications
and service procedures, some minor deviations
may be found between this literature and your
equipment. Differences in local codes and plant
requirements, material delivery requirements,
etc., make such variations inevitable. Compare
this manual with your system installation draw-
ings and appropriate ITW Ransburg equipment
manuals to reconcile such differences.

Careful study and continued use of this manual
will provide a better understanding of the equip-
ment and process, resulting in more efficient op-
eration, longer trouble-free service and faster,
easier troubleshooting. If you do not have the
manuals and safety literature for your Ransburg
system, contact your local ITW Ransburg rep-
resentative or ITW Ransburg.

SAFETY

Fluid Pump Motor Speed Control Station - Safety

The user MUST

MUST

MUST read and be familiar

with the Safety Section in this manual and
the ITW Ransburg safety literature therein
identified.

This manual MUST

MUST

MUST be read and thor-

oughly understood by ALL

ALL

ALL personnel who

operate, clean or maintain this equipment!
Special care should be taken to ensure
that the WARNINGS

WARNINGS

WARNINGS and safety require-

ments for operating and servicing the
equipment are followed. The user should
be aware of and adhere to ALL

ALL

ALL local

building and fire codes and ordinances as
well as NFPA 33 SAFETY STANDARD,

NFPA 33 SAFETY STANDARD,

1995 EDITION,

1995 EDITION, prior to installing, operat-
ing, and/or servicing this equipment.

The hazards shown on the following

page may occur during the normal use of
this equipment. Please read the hazard
chart beginning on page 2.

W A R N I N G

!!!!!

W A R N I N G

!!!!!