Ransburg 9060 Power Supply Kit 80104 Ext. Cascade (AEMD600) - Manual (Page 19)

9060 Power Supply Kit - Installation
CP-13-01.1 16
INSTALLATION
The 9060 Controller MUST be located
outside of the hazardous area.
The User MUST read and be familiar
with the “Safety” section of this manual.
This manual MUST be read and thor-
oughly understood by ALL personnel who
operate, clean, or maintain this equipment!
Special care should be taken to ensure that
the warnings and requirements of operating
and servicing safely are followed. The user
should be aware of and adhere to ALL local
building and fire codes and ordinances as
well as NFPA-33, OSHA, and all related
country safety codes prior to installing, op-
erating, and/or servicing this equipment.
! W A R N I N G
Refer to CP-13-05 or CP-13
-02 (Included with Your Kit)
for Control Unit Installation
Instructions.