Ransburg No. 2 Spray Techniques - Manual (Page 10)

IL-211-D 7
No. 2 Process Handgun Spray Techniques
FLAT SURFACES
(Continued)
On flat work, patterns may be overlapped as
much as 50%.
Another suitable technique, which is often used,
is to move the gun in a slow spiraling path across
the part, barely overlapping on the passes.
Some overstroke at the edge of the target will help
produce more wrap-around and better edge coverage.
Attention: Chain-link fence, or other expanded metalware, is normally sprayed the same as flat work.
Fences are coated easiest by spraying from the post side.