KISAE 50 Portable PowerPack - Manual (Page 3)

Page 3
WARNING
Read all instruction and warnings prior to using this product. Improper use of this product may result in
product damage, excess heat, toxic fumes, fire or explosion, for which damages you (purchaser), and
not manufacturer are responsible.
•
Use only with the supplied AC Charger to charge the Portable PowerPack. Use of non-supplied AC
charger will damage or overcharge the battery and may cause fire hazard.
•
Do not store unit in high temperature environment, including intense sunlight heat. Do not place unit
near fire or other excessively hot environments.
•
Be cautious of excessive drops, bumps, abrasions or other impurities. If there is any damage to the
battery such as dents, punctures, tears, deformities of corrosion, due to any cause, discontinue use
and contact manufacturer or dispose of in an appropriate manner.
•
Do not disassemble or attempt to modify it or replace any part of this unit.
•
Do not expose unit to moisture, snow or submerge it in liquid.
•
Do not use unit in the vicinity of flammable fumes or gases (such as propane tanks or large engines).
•
Do not attempt to charge unit using any other method, or connection other than the supplied
accessories.
•
Do not cover or obstruct any air vent openings and/or install in a zero-clearance compartment.
•
Do not use in connection with life support systems or other medical equipment or devices.
•
Do not plug surge-protected power bars into the unit’s 120 VAC outlets. The surge protected
components on the surge-protected power bar may not like the modified sine wave output generated
by the inverter.
•
If this unit is intended by purchaser to be used by a minor, an adult should agree to provide detailed
instructions and warnings to any minor prior to use. Failure to do so is sole responsibility of purchaser.
Purchaser agrees to indemnify manufacturer for any unintended use of misuse by a minor.
•
All units have gone through a thorough quality assurance. If you find that your unit is excessively hot,
is emitting odor, is deformed, abraded, cut or is experiencing or demonstrating an abnormal
phenomenon, immediately stop use.
•
Never dispose of units in the garbage. Disposal of units in the garbage is unlawful under state and
federal environmental laws and regulations. Always take used unit to your local battery recycling
center.
•
Unit provides 120 VAC, treat AC output socket as you would regular wall AC sockets at home.
•
AC Output is with modified sine wave, some appliances like speed controllers found in some fans and
some power tools’ or their AC charger may not like the modified sine wave generated by the inverter.
Those appliances may not work or may be damaged if they are connected to the inverter. If you are
unsure about powering any device with the inverter, contact the manufacturer of the device.
This unit is meant for use only in conjunction with the appropriate mobile device. Manufacturer shall not
in any way be liable to you or to any third party for any damages you or any third party may suffer as a
result of use, intended or unintended, or misuse of this unit in conjunction with any device or accessory
other than the appropriate mobile device for which this unit is designed. Manufacturer will not be
responsible for any damages you or any third party may suffer as a result of misuse of this unit as
outlined above. If you are responsible for unit use with an unintended mobile device and damages result
from such use, you agree to indemnify manufacturer for any resulting injuries to any third part(ies).
SPECIFICATION
PP 100 PP 50
AC Output 120Vac/60 Hz, 90W 120Vac/60Hz, 50W
DC Output (USB) 2.1A, 2.1A, 1.0A 2.1A, 2.1A, 1.0A
DC Input 12.6-22.0Vdc, 2A max 16.8-22.0Vdc, 2A max
Battery Type Li-ion Polymer Li-ion Polymer
Battery Capacity 25200mA / 90.7Wh 15200mA / 54.7Wh
Regulatory Approval cETLus cETLus
Regulatory Standard UL 1741 UL 1741
CSA C22.2 No.107.1-01 CSA C22.2 No.107.1-01