beautypg.com

Programming, Characteristics, Warranty – Aube Technologies TH110-SP-P User Manual

Page 2

background image

The ECONO mode has two (2) programs in which the

day, the time and the setpoint have to be pro-

grammed. For instance, this operating mode can be

used for a cottage installation where the user goes only

on weekends.

Program 1: Friday 3:00 PM, 20 °C (68 °F)

Program 2: Friday 8:00 PM, 15 °C (59 °F)

The temperature will be maintained at 20 °C (68 °F)

Friday from 3:00 PM to 8:00 PM, and maintained

at 15 °C (59 °F) the rest of the week.

This gives you a comfortable temperature at your

arrival and if you are not going to your cottage

for the weekend, there will be only a minimal

heating period.

To see the ECONO programs, select the ECONO

operating mode and press on P button successively

to see programs 1 and 2 appear on the display. In

ECONO mode, by pressing once on

or

, the

display shows the temperature setting. All subsequent

pressures will override your programming up to the

next program.

PROGRAMMING

1) Adjustment of time and day

Note: Select your OPTIONS before adjusting your time, because using the

RESET button will set the time back to default 0:00 MO (Monday).
Example of setting: Thursday 8:15 AM

Use D, H and M buttons to set the time. Once

set, press on R button to exit the time and day

adjustment mode.

Note 2:The thermostat has an automatic return.

When such functions as time recording, pro-

grams recording, etc., are not completed by

pressing

on

return

(R)

button,

the

thermostat will automatically exit the mode

after 60 seconds.

2) Typical suggested programs

This thermostat can store up to four (4) daily programs for weekdays and four

(4) daily programs for the weekend. Also, there is two (2) programs for the

ECONO mode. To practice programming use the following example.

Program number

Time

Temperature setting

Weekday programs (Mon...Friday)
Program 1

6:30 AM

20 °C (68 °F)

Program 2

8:30 AM

15 °C (59 °F)

Program 3

4:30 PM

20 °C (68 °F)

Program 4

11:00 PM

15 °C (59 °F)

Weekend programs (Sat & Sun)
Program 1

7:00 AM

20 °C (68 °F)

Program 2

8:30 AM

15 °C (59 °F)

Program 3

4:30 PM

20 °C (68 °F)

Program 4

11:00 PM

15 °C (59 °F)

ECONO mode programs (weekend cottage)
Program 1

Friday 3:00 PM

20 °C (68 °F)

Program 2

Friday 8:00 PM

15 °C (59 °F)

Press on P button again to record or modify

weekday programs 2, 3 and 4 and weekend

programs 1, 2, 3 and 4.

Use H, M,

or

buttons to modify

the time and setpoint of programs.

Programming is now completed. Press on R

button or wait for the "automatic return"

to exit the programming mode.

Note: A program time left at -- -- : -- --

is considered inactive.

Select the ECONO mode.

Press on P button once.

The default values or the last recording

of program 1 will be displayed.

The default values are :

• 20 °C (68 °F) and the time -- -- : -- -- .

Use D, H, M and

or

buttons to record

the day, the time and the setpoint of program 1.

Press a second time on P button.

The default values or the last recording

of program 2 will be displayed.

Use D, H, M and

or

buttons to modify

the day, time and setpoint of program 2.

Programming is now completed. Press on R

button or wait for the "automatic return"

to exit the programming mode.

4) Recording the ECONO programs

To reset a program, use P button to select the program, then press

on MODE button.

To review programs, press on P button successively to see the programs

one after the other and make modifications if required.

CHARACTERISTICS

- Model: TH110-SP-P

- Electronic programmable thermostat

- Supply: 240 VAC, 50/60 Hertz

- Load: 20 A maximum, 1 HP

- Power: 4800 W @ 240 VAC

- Power consumption (off): 860 mW

- Approvals: CSA NRTL/C

- Display range: 0 °C to 99 °C (0 °F to 99 °F)

- Setting range: 5 °C to 27 °C (40 °F to 80 °F)

- Storage: -20 °C to 50 °C (-4 °F to 120 °F)

- Temperature regulation: 1 °C (1 °F)

- Precision: ± 0.5 °C (1 °F) (4800 W)

- 10 programs: 4 weekday programs, 4 weekend programs

and 2 ECONO programs

3) Recording the heating programs

Select the AUTO mode.
Press on P button once.
The default values or the last recording

of program 1 will be displayed.
The default values are:

• 20 °C (68 °F) and the time -- -- : -- --.
The days Monday to Friday are displayed to show

that this program is for weekdays.

AUBE TECHNOLOGIES INC. ONE (1) YEAR LIMITED WARRANTY

This product is warranted against material defects and workmanship in normal

use for a period of one year, from the date of the original purchase from autho-

rized dealers. During this period, AUBE technologies inc. will repair or replace

the product with a new or of equivalent quality at AUBE'S option, without

charge, any product proven defective in normal use.

Warranty does not cover transportation costs. Nor does it cover a product sub-

jected to misuse or accidental damage. This warranty does not cover the cost of

installation, removal or reinstallation.

This limited warranty is in lieu of all other warranties, obligations or liabilities

expressed or implied by the company. In no event shall AUBE technologies inc.

be liable for consequential or incidental damages resulting from installation of

this product. Some states or provinces do not allow limitations on how long an

implied warranty lasts, or the exclusion or limitation of incidental or conse-

quential damages, so the above exclusions or limitations may not apply to you.

This warranty gives you specific legal rights and you may also have other rights

which vary from state to state.

The defective product and the original sale receipt must be returned

to the original dealer or shipped pre-paid, insured and addressed to:

Aube technologies inc. • Customer Service • 705, Av. Montrichard

Iberville (Quebec) • J2X 5K8
If you have any questions concerning the installation or programming of this

product, please call our technical assistance at (450) 358-4600 for the Montreal

area or

1-800-831-AUBE

for outside area, Monday to Friday between

8:30 AM and 5:00 PM Eastern time.

WARRANTY

Press on H and M buttons until 6:30 is displayed.

Press on

or

until 20 °C (68 °F) is displayed.

The first program is recorded.

Note 1:

icon is showing you that the time

must be set.

ATTENTION: SEE TABLE PROBLEMS AND

SOLUTIONS ON ATTACHED ANNEXE.

720-110522-A

2/3